
Jaquar Florentine Prime Kitchen Sink Cock, Chrome
Product Highlights
- Manufacturer: Jaquar India
- Range: Florentine Prime Series
- Variants Available: Wall Mounted - FLP-CHR-5347PM, Table Mounted - FLP-CHR-5357PM
- Type: Kitchen Sink Cock with 360° Regular Swinging Spout
- Material: Solid Brass (IS:1264-1997, IS:319-1989, IS:407-1996)
- Finish: Polished Chrome - Nickel 10.0µm, Chrome 0.3µm - 500+ hour salt spray validated
- Application: Residential kitchens, island counters, and commercial office pantries
Product Description
Jaquar Florentine Prime Sink Cock is a premium kitchen faucet forged from solid high-density brass, available in a wall-mounted (FLP-CHR-5347PM) and table-mounted (FLP-CHR-5357PM) configuration. The 360-degree regular swinging spout provides high clearance and full basin access for large cookware and dual-bowl sinks. The multi-layer Nickel 10.0µm and Chrome 0.3µm finish is validated to 500+ hours salt spray resistance, protecting against rust, peeling, and hard water scaling. Inside, a WRAS-approved food-grade cartridge rated to 5,000,000 cycles ensures smooth, leak-free operation for the long term. Both variants deliver approximately 16 LPM at 3 Bar and are certified for water tightness up to 16 Bar, making them compatible with booster pump installations.
Key Features
- 360° swinging spout: High-clearance swivel for full basin access with large cookware and dual-bowl sinks
- 500+ hour salt spray validated chrome: Nickel 10.0µm and Chrome 0.3µm resists rust, peeling, and hard water scaling
- WRAS food-grade cartridge: 5,000,000 cycle rated - safe for drinking water, smooth leak-free operation
- High-pressure certified: Water tightness up to 16 Bar - compatible with booster pump installations
- 2 mounting options: Wall mounted with decorative flange (5347PM) or table / counter mounted (5357PM)
Variant Comparison
| Specification | Wall Mounted | Table Mounted |
|---|---|---|
| Product Code | FLP-CHR-5347PM | FLP-CHR-5357PM |
| Mounting Style | Wall mounted with decorative wall flange | Table / deck / counter mounted |
| Flow Rate @ 3 Bar | 16.08 LPM | 15.98 LPM |
| Operating Pressure | 0.5 Bar - 5.0 Bar | 0.5 Bar - 5.0 Bar |
| Aerator | WRAS and ACS approved - M 20x1 | WRAS and ACS approved - M 20x1 |
| Salt Spray Rating | 500+ hours validated | 500+ hours validated |
| Finish Options | Chrome, Black Chrome, Black Matt | Chrome, Black Chrome, Black Matt |
Installation Notes
Installation Guidelines
- Flush supply lines first: Clear grit, silt, and thread tape debris from plumbing lines before mounting
- Wall mounted (5347PM): Wrap male shank threads with PTFE tape, slide on the chrome wall flange, and screw tightly into the wall elbow with a padded wrench
- Table mounted (5357PM): Lower the threaded body through the countertop pre-drilled hole, clamp from below with the locking nut, and connect to the stop valve via flexible braided hose
- Aerator maintenance: Periodically unscrew the M 20x1 aerator to clear pipe scale and maintain a smooth, splash-free stream
Why Buy from HomeRun?
- Authentic Jaquar Product: Verified genuine product sourced from authorized Jaquar channels
- 60-Minute Bangalore Delivery: Express delivery to active service zones - ideal for active plumbing and renovation projects
- Project-Friendly Availability: Single-unit ordering for kitchen-by-kitchen procurement on residential and commercial fit-outs
FAQs
1) What is the difference between the wall-mounted and table-mounted variants?
The FLP-CHR-5347PM is a wall-mounted faucet that connects directly to water outlets inside the wall, with a decorative chrome wall flange covering the pipe entry point. The FLP-CHR-5357PM is a table-mounted (deck-mounted) faucet that installs vertically through a pre-drilled hole in the sink rim or countertop and connects to an under-counter stop valve via a flexible braided hose.
2) Does this faucet mix hot and cold water?
No - both models are single-inlet sink cocks designed for a single cold water or single-temperature supply line. They do not have a hot and cold mixing mechanism.
3) Are the flow rates the same for both variants?
Nearly identical - the wall-mounted variant delivers 16.08 LPM and the table-mounted variant delivers 15.98 LPM, both at 3 Bar pressure.
4) Can these faucets handle high-pressure booster pump installations?
Yes - both variants are tested to water tightness up to 16 Bar and structural pressure resistance up to 25 Bar, making them fully compatible with high-pressure booster pump systems.
5) How do I maintain the chrome finish?
Wipe dry daily with a soft microfiber cloth to prevent hard water spots from forming. Never use acid-based cleaners, harsh chemical fluids, or abrasive scrubbing pads - these etch and scratch the nickel plating permanently. Mild soapy water and a soft cloth is all that is needed for routine cleaning.
Returns & Exchange Policy
- Return within 72 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
Original: $19.40
-70%$19.40
$5.82More Images






Jaquar Florentine Prime Kitchen Sink Cock, Chrome
Product Highlights
- Manufacturer: Jaquar India
- Range: Florentine Prime Series
- Variants Available: Wall Mounted - FLP-CHR-5347PM, Table Mounted - FLP-CHR-5357PM
- Type: Kitchen Sink Cock with 360° Regular Swinging Spout
- Material: Solid Brass (IS:1264-1997, IS:319-1989, IS:407-1996)
- Finish: Polished Chrome - Nickel 10.0µm, Chrome 0.3µm - 500+ hour salt spray validated
- Application: Residential kitchens, island counters, and commercial office pantries
Product Description
Jaquar Florentine Prime Sink Cock is a premium kitchen faucet forged from solid high-density brass, available in a wall-mounted (FLP-CHR-5347PM) and table-mounted (FLP-CHR-5357PM) configuration. The 360-degree regular swinging spout provides high clearance and full basin access for large cookware and dual-bowl sinks. The multi-layer Nickel 10.0µm and Chrome 0.3µm finish is validated to 500+ hours salt spray resistance, protecting against rust, peeling, and hard water scaling. Inside, a WRAS-approved food-grade cartridge rated to 5,000,000 cycles ensures smooth, leak-free operation for the long term. Both variants deliver approximately 16 LPM at 3 Bar and are certified for water tightness up to 16 Bar, making them compatible with booster pump installations.
Key Features
- 360° swinging spout: High-clearance swivel for full basin access with large cookware and dual-bowl sinks
- 500+ hour salt spray validated chrome: Nickel 10.0µm and Chrome 0.3µm resists rust, peeling, and hard water scaling
- WRAS food-grade cartridge: 5,000,000 cycle rated - safe for drinking water, smooth leak-free operation
- High-pressure certified: Water tightness up to 16 Bar - compatible with booster pump installations
- 2 mounting options: Wall mounted with decorative flange (5347PM) or table / counter mounted (5357PM)
Variant Comparison
| Specification | Wall Mounted | Table Mounted |
|---|---|---|
| Product Code | FLP-CHR-5347PM | FLP-CHR-5357PM |
| Mounting Style | Wall mounted with decorative wall flange | Table / deck / counter mounted |
| Flow Rate @ 3 Bar | 16.08 LPM | 15.98 LPM |
| Operating Pressure | 0.5 Bar - 5.0 Bar | 0.5 Bar - 5.0 Bar |
| Aerator | WRAS and ACS approved - M 20x1 | WRAS and ACS approved - M 20x1 |
| Salt Spray Rating | 500+ hours validated | 500+ hours validated |
| Finish Options | Chrome, Black Chrome, Black Matt | Chrome, Black Chrome, Black Matt |
Installation Notes
Installation Guidelines
- Flush supply lines first: Clear grit, silt, and thread tape debris from plumbing lines before mounting
- Wall mounted (5347PM): Wrap male shank threads with PTFE tape, slide on the chrome wall flange, and screw tightly into the wall elbow with a padded wrench
- Table mounted (5357PM): Lower the threaded body through the countertop pre-drilled hole, clamp from below with the locking nut, and connect to the stop valve via flexible braided hose
- Aerator maintenance: Periodically unscrew the M 20x1 aerator to clear pipe scale and maintain a smooth, splash-free stream
Why Buy from HomeRun?
- Authentic Jaquar Product: Verified genuine product sourced from authorized Jaquar channels
- 60-Minute Bangalore Delivery: Express delivery to active service zones - ideal for active plumbing and renovation projects
- Project-Friendly Availability: Single-unit ordering for kitchen-by-kitchen procurement on residential and commercial fit-outs
FAQs
1) What is the difference between the wall-mounted and table-mounted variants?
The FLP-CHR-5347PM is a wall-mounted faucet that connects directly to water outlets inside the wall, with a decorative chrome wall flange covering the pipe entry point. The FLP-CHR-5357PM is a table-mounted (deck-mounted) faucet that installs vertically through a pre-drilled hole in the sink rim or countertop and connects to an under-counter stop valve via a flexible braided hose.
2) Does this faucet mix hot and cold water?
No - both models are single-inlet sink cocks designed for a single cold water or single-temperature supply line. They do not have a hot and cold mixing mechanism.
3) Are the flow rates the same for both variants?
Nearly identical - the wall-mounted variant delivers 16.08 LPM and the table-mounted variant delivers 15.98 LPM, both at 3 Bar pressure.
4) Can these faucets handle high-pressure booster pump installations?
Yes - both variants are tested to water tightness up to 16 Bar and structural pressure resistance up to 25 Bar, making them fully compatible with high-pressure booster pump systems.
5) How do I maintain the chrome finish?
Wipe dry daily with a soft microfiber cloth to prevent hard water spots from forming. Never use acid-based cleaners, harsh chemical fluids, or abrasive scrubbing pads - these etch and scratch the nickel plating permanently. Mild soapy water and a soft cloth is all that is needed for routine cleaning.
Returns & Exchange Policy
- Return within 72 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Product Highlights
- Manufacturer: Jaquar India
- Range: Florentine Prime Series
- Variants Available: Wall Mounted - FLP-CHR-5347PM, Table Mounted - FLP-CHR-5357PM
- Type: Kitchen Sink Cock with 360° Regular Swinging Spout
- Material: Solid Brass (IS:1264-1997, IS:319-1989, IS:407-1996)
- Finish: Polished Chrome - Nickel 10.0µm, Chrome 0.3µm - 500+ hour salt spray validated
- Application: Residential kitchens, island counters, and commercial office pantries
Product Description
Jaquar Florentine Prime Sink Cock is a premium kitchen faucet forged from solid high-density brass, available in a wall-mounted (FLP-CHR-5347PM) and table-mounted (FLP-CHR-5357PM) configuration. The 360-degree regular swinging spout provides high clearance and full basin access for large cookware and dual-bowl sinks. The multi-layer Nickel 10.0µm and Chrome 0.3µm finish is validated to 500+ hours salt spray resistance, protecting against rust, peeling, and hard water scaling. Inside, a WRAS-approved food-grade cartridge rated to 5,000,000 cycles ensures smooth, leak-free operation for the long term. Both variants deliver approximately 16 LPM at 3 Bar and are certified for water tightness up to 16 Bar, making them compatible with booster pump installations.
Key Features
- 360° swinging spout: High-clearance swivel for full basin access with large cookware and dual-bowl sinks
- 500+ hour salt spray validated chrome: Nickel 10.0µm and Chrome 0.3µm resists rust, peeling, and hard water scaling
- WRAS food-grade cartridge: 5,000,000 cycle rated - safe for drinking water, smooth leak-free operation
- High-pressure certified: Water tightness up to 16 Bar - compatible with booster pump installations
- 2 mounting options: Wall mounted with decorative flange (5347PM) or table / counter mounted (5357PM)
Variant Comparison
| Specification | Wall Mounted | Table Mounted |
|---|---|---|
| Product Code | FLP-CHR-5347PM | FLP-CHR-5357PM |
| Mounting Style | Wall mounted with decorative wall flange | Table / deck / counter mounted |
| Flow Rate @ 3 Bar | 16.08 LPM | 15.98 LPM |
| Operating Pressure | 0.5 Bar - 5.0 Bar | 0.5 Bar - 5.0 Bar |
| Aerator | WRAS and ACS approved - M 20x1 | WRAS and ACS approved - M 20x1 |
| Salt Spray Rating | 500+ hours validated | 500+ hours validated |
| Finish Options | Chrome, Black Chrome, Black Matt | Chrome, Black Chrome, Black Matt |
Installation Notes
Installation Guidelines
- Flush supply lines first: Clear grit, silt, and thread tape debris from plumbing lines before mounting
- Wall mounted (5347PM): Wrap male shank threads with PTFE tape, slide on the chrome wall flange, and screw tightly into the wall elbow with a padded wrench
- Table mounted (5357PM): Lower the threaded body through the countertop pre-drilled hole, clamp from below with the locking nut, and connect to the stop valve via flexible braided hose
- Aerator maintenance: Periodically unscrew the M 20x1 aerator to clear pipe scale and maintain a smooth, splash-free stream
Why Buy from HomeRun?
- Authentic Jaquar Product: Verified genuine product sourced from authorized Jaquar channels
- 60-Minute Bangalore Delivery: Express delivery to active service zones - ideal for active plumbing and renovation projects
- Project-Friendly Availability: Single-unit ordering for kitchen-by-kitchen procurement on residential and commercial fit-outs
FAQs
1) What is the difference between the wall-mounted and table-mounted variants?
The FLP-CHR-5347PM is a wall-mounted faucet that connects directly to water outlets inside the wall, with a decorative chrome wall flange covering the pipe entry point. The FLP-CHR-5357PM is a table-mounted (deck-mounted) faucet that installs vertically through a pre-drilled hole in the sink rim or countertop and connects to an under-counter stop valve via a flexible braided hose.
2) Does this faucet mix hot and cold water?
No - both models are single-inlet sink cocks designed for a single cold water or single-temperature supply line. They do not have a hot and cold mixing mechanism.
3) Are the flow rates the same for both variants?
Nearly identical - the wall-mounted variant delivers 16.08 LPM and the table-mounted variant delivers 15.98 LPM, both at 3 Bar pressure.
4) Can these faucets handle high-pressure booster pump installations?
Yes - both variants are tested to water tightness up to 16 Bar and structural pressure resistance up to 25 Bar, making them fully compatible with high-pressure booster pump systems.
5) How do I maintain the chrome finish?
Wipe dry daily with a soft microfiber cloth to prevent hard water spots from forming. Never use acid-based cleaners, harsh chemical fluids, or abrasive scrubbing pads - these etch and scratch the nickel plating permanently. Mild soapy water and a soft cloth is all that is needed for routine cleaning.
Returns & Exchange Policy
- Return within 72 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
- Product cannot be returned once installed or used
- Refer to Refund Policy for complete details





















